Home Depot Wood For Deck

How To Get Assistance When You Need Your Wood Cut

How to Prep a Deck for Staining | The Home Depot

Usually, you bring your wood to the cutting area, and there is usually a call button that you can press for assistance. An employee who is authorized to use the equipment will then come and make your cuts for you. Depending on how busy the store is, you might need to go track down someone to help you. In some cases, there might not be anyone readily available to make your cuts for you.

Can You Install Trex Over An Existing Deck

Many homeowners looking to save money on installing a new deck wonder if its possible to put Trex boards over the existing deck.

The good news is that YES this is not only possible but can actually be a great way to resurface your old deck without spending a fortune.

Overtime, real wood deck boards age and create many problems, such as warping, nailing sticking out, cracking, high risk of getting splinters, etc. They are easily replaced with long last Trex Boards at a fraction of the cost of building a new deck.

If the foundation and the framing system of your current deck is sound and its just the walking boards that are looking worn, you can simple replace them with new and beautiful Trex boards and deck railings.

Overall, if you are replacing the walking boards yourself, you can easily end up spending less then $1,000 on new Trex boards and railing, if you are going for either Trex Select or Trex Enhance.

Ground Level Vs Second Story Deck

In general, a deck will be built no more than two inches below the bottom of the door used to access the deck.

Types of decks:

  • Low elevation deck – for houses built at ground level
  • Mid-elevation deck for raised houses
  • High-elevation deck for split-level homes
  • A high-elevation deck with a space under it less than eight feet tall could be used for storage for lawnmowers and yard equipment. If the space is at least eight feet high, then you could create an additional living area with a deck floor and ceiling leaving a balcony for the top, which will add an additional cost per square foot.

    Also Check: Deck Plans Mariner Of The Seas

    Material Costs To Build A Deck

    Material costs to build a deck range from $6 to $8 per square foot on average. The three most popular materials for the construction of outdoor decks in the US are pressure-treated wood, hardwood, and recycled composite.

    Trex Decking $8 $20

    The cost of materials provided is an average from across the country, and depending on where you live, you may experience slightly more or slightly less per square foot for your project.

    How Precise Will Home Depot Cut My Wood For Me

    WeatherShield 5/4 in. x 6 in. x 8 ft. Premium Cedar

    The staff wont make precise cuts, so ask the employee to cut the wood slightly longer than you need. This way, you can trim it down the way you want it when you arrive at your job site.

    For example, there isnt a miter saw in this area because the staff wont make detailed cuts. In addition, dont expect them to precisely measure your wood for you either.

    Your best bet is to only use the service if you need to have wood cut to a more manageable size. For example, you might have a sheet of plywood that you need cut in half in order to fit into your vehicle.

    Don’t Miss: How To Get Rid Of Moss On Lawn

    What You Need To Know About Getting Wood Cut At Home Depot

    It should be noted first that you can only get Home Depot to cut wood that you purchase from them in-store. Home Depot has an area, usually toward the back of the store, where youll discover a couple of basic power saws. These saws are intended to make rough cuts with the sole purpose of making wood easier to handle.

    This area and equipment is for employees only. Find a Home Depot customer service member once you arrive in the store and know you will need your wood cut before you leave.

    The Type Of Equipment Home Depot Has To Cut Your Wood

    Home Depot cutting services typically have a panel saw and a chop saw, which can be used to make simple cuts. Although Home Depot provides cutting services to its customers, you shouldnt rely on them to make your actual project cuts.

    If youre purchasing large pieces of wood, this service is mainly for cutting the pieces down to a smaller size. This comes in handy if youre driving a small vehicle and the lumber you need only comes in large units.

    You May Like: Backyard Memorial Memorial Garden Ideas

    Cost To Build Pergola Or Roof Over Deck

    The average price to build a roof over your deck, or add pergola framing is between $0.70 and $1.30/sqft. Include $40 to $50 for supporting posts and concrete, and an additional $2.60 per square foot for flat asphalt roof covering. Another option is a manual deck cover which costs $500 to $1,500 or $1,700 and up for a motorized cover.

    Cost To Add Hot Tub To Deck

    How To Refinish a Deck | The Home Depot with @This Old House

    The average cost to install a hot tub to a deck is $4,000 and $15,000 depending on the size, features, and model. Depending on the number of people you want to accommodate in the hot tub the number of jets how long you want the product to last the type of inner shell and features like drink holders, colored LED lighting, etc., you will see a range of prices:

    Cost To Add Hot Tub To Deck

    Hot Tub Type
    Luxury $13,000 $15,000

    For the hot tub installation, you can simply set the hot tub right on top of the deck, or, if you have a slightly raised portion of the deck, it can be set down into a cutout. If the hot tub is going to be recessed, then some form of entry will need to be created to provide access for any maintenance that the hot tub pumps or electrical setup might need.

    Alternatively, building an outdoor sauna costs$5,500 to $34,000.

    Recommended Reading: Replacement Screen Door For Patio

    Will Home Depot Make Angular Cuts For Me

    In addition to Home Depot Services not having the capacity to make precise and exact cuts, they also will not be able to make specific angular cuts for you. Angular cuts often require a lot of space, as the process involves placing the wood on a saw at an awkward angle.

    Angular cuts also may require quality craftsmanship and special blades in order to prevent nicks in the wood and splintered cuts. Again, Home Depot cutting services exist as a convenience, not as an alternative to professional carpentry. Any specific measured cuts should be done by a professional with the proper tools.

    No Stains Fades Mould Or Mildew

    Finally, a deck that resists everything, but a good time.

    DuraLife composite decking products feature SolarGuard®, a co-extruded polypropylene outer shell that ensures stain and fade resistant decking, that also resists everyday spills and normal wear and tear. The decking materials built-in resistance to mould and mildew growth improves safety and reduces maintenance and its superior moisture and thermal resistance minimizes expansion and contraction problems. Every DuraLife composite decking product is backed by a 25-year limited product performance warranty.

    Read Also: Best Oil Based Deck Stain

    Pressure Treated Lumber Quality

    Im preparing to build a deck. Is there any difference in the quality of pressure treated lumber from Home Depot/Lowes vs a real lumber yard? Home Depot has something called PRO-WOOD and Lowes has the green looking stuff, is one a better choice? I ask since everytime I buy lumber from HD or Lowes I sort thru the stack and select straight boards, but a month later they are twisted and warped.

  • |#1

    It won’t hurt to go ask. Depending on where you are you might be ablt get different levels of quality but mine always beats the quality from the BBs. I have no idea who they buy from but it’s better than the rest qualitywise.

    For me delivery is free so I don’t have to handle the wood 2x before I even get to the job site.

  • those are marketing gimicks… the real and ONLY grade for lumber is stamped on each piece

    or in our part of the country the species will be SYP

    SYP has a wild grain, and it’s wet from the treating process… you have to make a visual inspection….over buy the quantity you need… sticker it to let it dry.. then cull your stock and return the twisted ones

    Mike Hussein Smith Rhode Island : Design / Build / Repair / Restore

  • |#5

    Thought I read somewhere the 2x lumber HD and Lowes sell is from the cuts of the tree which are more prone to twisting, etc. I don’t know if there is a way to tell by looking at the grain of the wood or if it even matters.

  • Home Depot Deck Stain Color Chart

    Home Depot Trex Decking Colors

    White Base Solid Color Waterproofing Exterior Wood Stain and Sealer. BEHR deck plus White Tint Base Solid Color Waterproofing Wood Stain · . BEHR deck plus White Tint Base Solid Color Waterproofing Wood Stain · . Cedar Rejuvenates Wood and Concrete Decks Premium Textured Resurfacer. Treat your deck to wood stains from top rated and trusted brands. Same goes for your garage floor, use a concrete stain to waterproof or go for a showroom quality look. Remember. Shows the natural color and texture of wood grain. Good for.

    Shop our selection of BEHR, Wood & Deck Stain in the Paint Department at The Home Depot. White Base Solid Color House and Fence Exterior Wood Stain. Preview colors to find the perfect color for your next wood-staining project. Update decks, fences, and more with professional quality stain. Looking for wood stain colors for your staining project? View the available wood stain colors from her to find the perfect hue for your project.

    Don’t Miss: Glass Patio Replacement Table Tops

    Pressure Treated Deck Cost

    On average, a pressure treated wood deck costs $6 per square foot for materials, or between $12 and $18 per square foot installed. Pressure-treated wood is used on almost 75% of all decks in the US today. Chemically treated under pressure, it is fabricated to make the wood more resistant to mold, insects, and rot.


    • Pressure-treated wood is generally made from low-grade fir or pine that tends to warp and crack over the long haul, and that creates the ongoing need for a rigid maintenance schedule.
    • When pressure-treated wood meets water, any metal used in the construction of the deck like aluminum flashing, galvanized nails and screws, fasteners, joists, and deck hangers will begin to corrode. If left without being repaired will cause dangerous structural instability in your deck.
    • If you elect to have pressure-treated wood used in your deck, you are signing up for a regular maintenance schedule that includes sanding, sealing, and staining.

    How Much Does It Cost For Home Depot To Cut Wood

    The cost of having wood cut at Home Depot is free for the first few cuts. Remember, this service is offered more as a convenience, though, so dont expect perfection. In other words, these employees cutting wood for you are not your contractors, and may not even be qualified to make specific and precise cuts. If you have specific cutting needs, you will have to handle them once you get the wood home.

    If you do need multiple cuts, there may be a small fee, but this varies by location. It is always best to communicate with the employee or help desk exactly what you are hoping for. Do not expect perfection, but do be sure to communicate your plans for the wood.

    Don’t Miss: Keter Deck Box 230 Gallon

    Outdoor Kitchen On Deck Costs

    If you just want a sink cabinet and counter area that you place your grill next to, you are likely to spend:

    • $600$900 for an entry-level, medium-sized, mid-priced sink
    • $1,500 and up for a larger sink with an exquisite faucet
    • $7,000$17,000 if you want to go all out and create a complete outdoor kitchen with a small fridge, counter space, and cabinets

    Dry Time Vs Cure Time

    Wood Deck & Porch Railings | The Home Depot

    Be sure to read the label on whichever deck stain you choose to see what the manufacturer suggests for dry time. Keep in mind that a deck that is dry to the touch is likely not ready to be walked on. A deck that is fully dry and ready for foot traffic may not have fully cured, which means the stain has fully seeped into the fibers of the wood to display its true color.

    You May Like: How To Charge Lawn Mower Battery

    What About Cutting Wood By Hand

    While you cant use the fun power tools, there is usually a hand saw station set up near themolding and trim. If you need smaller pieces of wood cut, the store provides this station as a convenience. It usually comes in the form of a cart, with a hand saw attached by a chain. There is a basket next to it for any scrap pieces that you do not want .

    If you decide to use this self-serve option, you are on your own and do so at your own risk. Home Depot makes it clear that it will not be held liable for any injuries. This is part of why the sign clearly states that the station is provided For your convenience.

    Besides only cutting products that you purchase from the store, there are a few other restrictions that Home Depot follows. Many stores will not let employees cut pieces of wood smaller than six inches for safety reasons.

    Will Home Depot Cut Other Products Other Than Wood

    In modern times, wood is certainly not the only popular building material. In fact, many faux-wood alternatives exist in woods place, and they are even sold at Home Depot. Although Home Depots cutting services are primarily used for cutting wood you buy in the store, they may also cut the following:

    • Sheet Flooring
    • Chains
    • Other Materials

    Remember it is always a good idea to call ahead and confirm that your local Home Depot cutting services are able to accommodate your cutting needs.

    Also Check: Apartments For Rent With Backyard

    Diy Installation Of A Trex Deck

    Unlike many other decking materials, Trex lends itself well to a DIY install. The boards are very light weight and easy to work with, and they are also readily available at your local Home Depot or Lowes.

    Trex.com offers a wealth of resources of building your own Trex deck without hiring a pro. Building a deck on your own can save you thousands of dollars, since the cost of professional deck construction is 60-70% of the total decking cost.

    Building your deck DIY is fairly simple if you are looking to have a regular size, one level rectangular or square deck without any luxury features.

    Which Home Depot Power Tool Brands Are The Best Fit For You

    Fiberon Horizon 1 in. x 5

    For many of us, theres a Home Depot within a reasonable driving distance of our homes. While there are certainly plenty of home improvement ideas and materials taking up most of the floor space, that power tool section is where you can what you need to bring it all together. Which power tool brands will you find at The Home Depot? Better yet, which ones are a good fit for the way you work?

    For the purposes of this article, were focusing on the brands you can grab in-store. There are other brands you can find that are online only.

    Ever wonder who owns which power tools brands? Check out this article to see which ones are part of larger groups and which ones stand on their own!

    Also Check: Patio Conversation Sets On Sale

    Can You Use Home Depots Saws To Cut Your Own Wood

    The short answer is a big, fat no you cannot use Home Depots saws on your own to cut your wood. Due to factors like liability and safety, customers are not allowed to use the power saws at Home Depot.

    You must get an employee to cut wood for you. If this was something that you were considering, perhaps you should purchase a saw if you dont have one at home. That way, you can cut your wood at your leisure. Retailers will likely never allow you to use their power tools for safety and liability reasons.

    Trex Decking Series Options

    Lets take a closer look at the features and benefits of the tree product lines that Trex manufactures.

    Trex Enhanced is the most affordable option, Trex Select is a mid-range choice, and Trex Transcend is the most high-end option.

    Trex Enhance Decking

    A Trex Enhanced deck is priced the most affordably, at $5 to $7 per square foot not including installation.

    The boards of a Trex Enhanced deck are all 0.94 inches thick and 5.5 inches wide. Lengthwise, Trex Enhance is offered in twelve foot long boards, sixteen foot long boards, and twenty foot long boards.

    The Trex Enhanced decking boards have a scalloped bottom, cutting down on the weight of the planks as well as the cost.

    The series comes in two styles: Basics and Naturals.

    Basics has three color choices, whereas Naturals offers four color options and a natural wood grain finish, reducing the synthetic appearance of the boards.

    Naturals is offered with a mid-depth grain pattern. Trex Enhanced has the lowest grade of Trex scratch resistance.

    Trex Select Decking

    Trex offers a mid-range decking option, Trex Select. This series costs between $7 and $9 per square foot not including installation.

    Trex Select boards are thinner than Trex Enhance boards, at 0.82 inches thick. The boards are 5.5 inches wide and twelve feet long. Trex Select is especially designed for easy, streamlined installation.

    The Select line is offered in five different color options, all with a mid-range grade. The boards have mid-level scratch resistance.

    Don’t Miss: Soil Test Kit For Lawn